Fasteners: Stainless

Showing posts with label Stainless. Show all posts

Sunday, September 18, 2011

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25)

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Feature

Ideal for quick assembly
Commonly used with clevis pins and shafts

Hitch Pins or hairpin cotter pins, these cotter pins are ideal for quick assembly. They're commonly used with clevis pins and shafts. 18-8 stainless steel is more corrosion resistant than zinc-plated steel and may be mildly magnetic.

Visit Store Now !!

Detail Products

Detail Reviews

Wednesday, August 24, 2011

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100)

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100) Reviews

Other Picture

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100) Feature

Installed by two easy operations, just drill and drive
Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel
Superior to and used in place of drive pins, taper pins, collar pins, etc.
Permit a wider tolerance because of the flexibility
Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, August 21, 2011

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100)

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Hex head for easy driving
Length is measured from under the head
Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, August 18, 2011

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50)

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50) Reviews

Other Picture

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50) Feature

Hex Bolts feature a chamfered point
Stainless Steel is suitable where formability and cost are important considerations
Hex head for easy driving
Length is measured from under the head
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Friday, July 29, 2011

Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)

Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Binding head provides a large surface area for extra surface contact under the head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Friday, July 1, 2011

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 100)

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 100) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 100) Feature

Flat Washers are an economical choice
Stainless Steel is suitable where formability and cost are important considerations
Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

Detail Reviews

Friday, June 10, 2011

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10)

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10) Reviews

Other Picture

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10) Feature

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Flat head style allows fastener to sit flush to the surface
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, May 29, 2011

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M5-0.8, 10mm Length (Pack of 10)

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M5-0.8, 10mm Length (Pack of 10) Reviews

Other Picture

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M5-0.8, 10mm Length (Pack of 10) Feature

Set Screws keep parts from turning relative to a shaft
General Purpose Stainless Steel suitable where formability and cost are important considerations
Do not have an external head
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Vented fasteners have been drilled through their entire length to eliminate the possibility of virtual leaks caused by the trapped volume of air at the bottom of blind tapped holes. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.