Fasteners: Length

Showing posts with label Length. Show all posts

Tuesday, September 27, 2011

Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100)

Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100) Reviews

Other Picture

Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Brass is suitable where corrosion resistance is a primary consideration
Round head style for a finished appearance
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Monday, September 26, 2011

Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500)

Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500) Reviews

Other Picture

Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500) Feature

Create their own threads when driven into material
Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
Flat head style allows fastener to sit flush to the surface
Phillips drive is designed to cam out under too much torque

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.

Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, September 18, 2011

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25)

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Feature

Ideal for quick assembly
Commonly used with clevis pins and shafts

Hitch Pins or hairpin cotter pins, these cotter pins are ideal for quick assembly. They're commonly used with clevis pins and shafts. 18-8 stainless steel is more corrosion resistant than zinc-plated steel and may be mildly magnetic.

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, September 11, 2011

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5)

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5) Reviews

Other Picture

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5) Feature

Hex Bolts feature a chamfered point
Coated with yellow zinc chromate for corrosion resistance
Hex head for easy driving
Length is measured from under the head
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Grade 8 fasteners are made of medium-carbon alloy steel that is quenched and tempered for added strength, with 120,000-130,000 PSI proof load and 150,000 PSI tensile strength. They have superior hardness for usage in applications where strength is a primary concern, and are grade-marked on the head with six radial lines. Yellow Zinc Chromate fasteners have been coated with zinc and with yellow chromate. As a result they offer corrosion resistance that is slightly higher than clear zinc.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, September 1, 2011

Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Pan head allows for higher tightening torques
Phillips drive is designed to cam out under too much torque
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Tuesday, August 30, 2011

Brass Machine Screw, Pan Head, Phillips Drive, #4-40, 3/16" Length (Pack of 100)

Brass Machine Screw, Pan Head, Phillips Drive, #4-40, 3/16" Length (Pack of 100) Reviews

Other Picture

Brass Machine Screw, Pan Head, Phillips Drive, #4-40, 3/16" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Brass is suitable where corrosion resistance is a primary consideration
Pan head allows for higher tightening torques
Phillips drive is designed to cam out under too much torque
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Wednesday, August 24, 2011

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100)

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100) Reviews

Other Picture

Stainless Steel 420 Spring Pin, 1/8" Diameter, 1" Length (Pack of 100) Feature

Installed by two easy operations, just drill and drive
Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel
Superior to and used in place of drive pins, taper pins, collar pins, etc.
Permit a wider tolerance because of the flexibility
Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

Detail Reviews

Sunday, August 21, 2011

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100)

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Hex Head, #1-72, 1/2" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Stainless Steel is suitable where formability and cost are important considerations
Hex head for easy driving
Length is measured from under the head
Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, August 18, 2011

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50)

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50) Reviews

Other Picture

Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 2" Length (Pack of 50) Feature

Hex Bolts feature a chamfered point
Stainless Steel is suitable where formability and cost are important considerations
Hex head for easy driving
Length is measured from under the head
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Friday, August 12, 2011

Acetal Dowel Pin, 1/4" Diameter, 1/2" Length (Pack of 100)

Acetal Dowel Pin, 1/4" Diameter, 1/2" Length (Pack of 100) Reviews

Other Picture

Acetal Dowel Pin, 1/4" Diameter, 1/2" Length (Pack of 100) Feature

Smooth finish and flat ends
Nonmarring plastic with low moisture absorption

Acetal Dowel pins have a smooth finish and flat ends, these plastic pins are nonmarring and have low moisture absorption. Dia. tolerance is + or -0.005. Pins are resistant to gas, oil, and other neutral chemicals. Max. temperature is 220 Degreess F. Rockwell hardness is M80. Dowel pins are simple headless cylinders that are commonly used as joining and locating devices, pivots, hinges, shafts, jigs, and fixtures in machine tool fabrication.

Visit Store Now !!

Detail Products

Detail Reviews

Thursday, August 11, 2011

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100)

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Binding head provides a large surface area for extra surface contact under the head
Driven by a flat-bladed driver
Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Wednesday, August 3, 2011

Black Oxide Alloy Steel Socket Cap Screw, Low Head, Hex Socket Drive, 1/2"-13, 1-1/2" Length (Pack of 25)

Black Oxide Alloy Steel Socket Cap Screw, Low Head, Hex Socket Drive, 1/2"-13, 1-1/2" Length (Pack of 25) Reviews

Other Picture

Black Oxide Alloy Steel Socket Cap Screw, Low Head, Hex Socket Drive, 1/2"-13, 1-1/2" Length (Pack of 25) Feature

Socket Cap Screws are durable and reliable
Black Oxide coating helps reduce friction and provides mild corrosion resistance
Low head is perfect for tight areas
Drive system is a hexagon-shaped hole
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Low head screws are perfect for tight areas, with heads that are about half the height of standard socket heads. Low head screws are not recommended for high strength applications. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Monday, August 1, 2011

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100)

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100) Feature

Machine Screws are often used with nuts or driven into tapped holes
Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
Binding head provides a large surface area for extra surface contact under the head
Driven by a flat-bladed driver
Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.