100PK #8 Zip-It Anchor Reviews
100PK #8 Zip-It Anchor Feature
- Hillman #375317 100PK #8 Zip-It Anchor
- HILLMAN FASTENERS
Friday, September 30, 2011
100PK #8 Zip-It Anchor
Wednesday, September 28, 2011
E-Z LOK Threaded Insert For Hard Wood; 6-32 Int Thread; Brass (Pack of 25)
E-Z LOK Threaded Insert For Hard Wood; 6-32 Int Thread; Brass (Pack of 25) Reviews
E-Z LOK Threaded Insert For Hard Wood; 6-32 Int Thread; Brass (Pack of 25) Feature
- Provides a Strong Machine Thread In Hard Woods
- Ideal For Use in Woods Like Oak, Cherry, and Maple
- Designed For Use In Furniture, Cabinetry, Storm Windows and Marine Applications
- Simply Drill the Appropriately Sized Hole and Install with Screwdriver or Optional Drive Tool
- Proprietary External Knife Threads Provide Superior Holding Power
Visit Store Now !!
Detail Products
Detail Reviews
Tuesday, September 27, 2011
Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100)
Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100) Reviews
Brass 330 Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100) Feature
- Machine Screws are often used with nuts or driven into tapped holes
- Brass is suitable where corrosion resistance is a primary consideration
- Round head style for a finished appearance
- Driven by a flat-bladed driver
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.
Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Visit Store Now !!
Detail Products
Detail Reviews
Monday, September 26, 2011
Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500)
Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500) Reviews
Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #6-20, 5/8" Length (Pack of 500) Feature
- Create their own threads when driven into material
- Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
- Flat head style allows fastener to sit flush to the surface
- Phillips drive is designed to cam out under too much torque
Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.
Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Visit Store Now !!
Detail Products
Detail Reviews
Wednesday, September 21, 2011
Crown Bolt 21262 #14 x 2-1/2 Inch Zinc-Plated Steel Flat-Head Phillips Wood Screws, 25-Count
Crown Bolt 21262 #14 x 2-1/2 Inch Zinc-Plated Steel Flat-Head Phillips Wood Screws, 25-Count Reviews
Crown Bolt 21262 #14 x 2-1/2 Inch Zinc-Plated Steel Flat-Head Phillips Wood Screws, 25-Count Feature
- Zinc-plated #14 x 2-1/2 inch wood screws flat head Phillips
- For general applications
- #14 body diameter
- 2-1/2-inch fastener length
- Flat head Phillips drive
Sunday, September 18, 2011
Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25)
Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Reviews
Stainless Steel 302 Hitch Pin, 3/16" Diameter, 1" Length (Pack of 25) Feature
- Ideal for quick assembly
- Commonly used with clevis pins and shafts
Visit Store Now !!
Detail Products
Detail Reviews
Sunday, September 11, 2011
Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5)
Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5) Reviews
Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5) Feature
- Hex Bolts feature a chamfered point
- Coated with yellow zinc chromate for corrosion resistance
- Hex head for easy driving
- Length is measured from under the head
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Grade 8 fasteners are made of medium-carbon alloy steel that is quenched and tempered for added strength, with 120,000-130,000 PSI proof load and 150,000 PSI tensile strength. They have superior hardness for usage in applications where strength is a primary concern, and are grade-marked on the head with six radial lines. Yellow Zinc Chromate fasteners have been coated with zinc and with yellow chromate. As a result they offer corrosion resistance that is slightly higher than clear zinc.
Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.
A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Visit Store Now !!
Detail Products
Detail Reviews
Tuesday, September 6, 2011
Carriage Bolt Fully Threaded Zinc 10-24 X 5/8 (Pack of 3,000)
Carriage Bolt Fully Threaded Zinc 10-24 X 5/8 (Pack of 3,000) Reviews
Carriage Bolt Fully Threaded Zinc 10-24 X 5/8 (Pack of 3,000)
Saturday, September 3, 2011
25# 9 x 3" Grn Exterior Screws
25# 9 x 3" Grn Exterior Screws Reviews
25# 9 x 3" Grn Exterior Screws Feature
- Patented Phillips Square Driv Drive System
- The Screw You've Used For Years Now Has A New Name!
- ACR - Won't Strip Out, Drives Off-Angle and Allows for More Torque
- Lifetime Guarantee Will Not Rust - Can be used in Pressure Treated Lumber
- Blue Driver Bit Included. Can use a #2 square and #2 phillips (ACR2 Phillips sold separately)
Visit Store Now !!
Detail Products
Detail Reviews
Thursday, September 1, 2011
Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100)
Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100) Reviews
Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 8mm Length (Pack of 100) Feature
- Machine Screws are often used with nuts or driven into tapped holes
- Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
- Pan head allows for higher tightening torques
- Phillips drive is designed to cam out under too much torque
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).
Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
Visit Store Now !!
Detail Products
Detail Reviews
Subscribe to:
Posts (Atom)