Red Head WS-5834 Trubolt Carbon Steel Wedge 5/8-Inch by 3-1/2-Inch Anchor (10 per Box)

Red Head WS-5834 Trubolt Carbon Steel Wedge 5/8-Inch by 3-1/2-Inch Anchor (10 per Box) Reviews

Other Picture

Red Head WS-5834 Trubolt Carbon Steel Wedge 5/8-Inch by 3-1/2-Inch Anchor (10 per Box) Feature

• Size: 5/8 inch length: 3-1/2 inch quantity: 10
• durable
• Easy to set
• Use to connect wood frame to concrete

Red Head Trubolt Carbon Steel Wedge 5/8 X 3-1/2-Inch Inch Anchor is used for structural columns, machinery, equipment, and non-corrosive environments. Trubolt Wedge anchors feature a stainless steel expansion clip, high-strength threaded stud body, nut and washer. The anchor bodies are made of plated carbon steel, and the expansion clip consists of a split cylindrical ring with undercutting grooves. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. The anchor diameter equals hole diameter, and they are non bottom-bearing, so they may be used in hole depth exceeding anchor length. Red Head anchors can be installed through the work fixture, eliminating hole spotting Inspectable torque values, indicating proper installation. Specs: Thread Length (inch) -- 1-3/4; Anchor Diameter and Drill Bit Diameter (inches) -- 5/8 - 11; Overall Length (inch) -- 3-1/2-Inch; Max. Thickness of Materials to be Fastened (inch) -- 1/8; Quantity per Box -- 10.

Visit Store Now !!

Detail Products

Detail Reviews

Wilmar W5217 110 Piece Copper Washer Assortment

Wilmar W5217 110 Piece Copper Washer Assortment Reviews

Other Picture

Wilmar W5217 110 Piece Copper Washer Assortment Feature

• 1 Set

Comes in organizer case.

Visit Store Now !!

Detail Products

• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Neiko 110 Pieces Copper Washer Assortment Set - SAE
• Plastic And Rubber Jeweler Hammer Dual Head
• Contemporary Copper Jewelry
• Stamped Metal Jewelry: Creative Techniques and Designs for Making Custom Jewelry

Detail Reviews

Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M4-0.7, 12mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M4-0.7, 12mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M4-0.7, 12mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Oval head style for recessed finish with a slightly rounded surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #8-32, 1/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 20mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Nylon Machine Screw, Pan Head, Phillips Drive, #10-24, 1/4" Length (Pack of 100)

Detail Reviews

Hillman Fastener Corp 47860 Outdoor Wood Screw

Hillman Fastener Corp 47860 Outdoor Wood Screw Reviews

Other Picture

Power Pro screws. For exterior applications. Bronze ceramic coating. Approximately 1000 hours salt spray resistance. Made of hardened steel. Star drive provides twice the drive torque of Phillips or square drive. Driver bit in every package. Type 17 drill

Visit Store Now !!

Detail Products

Detail Reviews

Metric M6 X 60mm Class 12.9 Black Oxide Alloy Socket Head Cap Screw

Metric M6 X 60mm Class 12.9 Black Oxide Alloy Socket Head Cap Screw Reviews

Other Picture

Metric M6 X 60mm Class 12.9 Black Oxide Alloy Socket Head Cap Screw Feature

• M6 Screw Size (6mm Thread Diameter)
• 60mm Length (Under Head)
• 1.00mm Thread Pitch; Class 12.9
• Black Oxide Finish is Suitable for Internal Use
• Pack of 10

Metric M6 (6mm) X 60mm Class 12.9 Black Oxide Alloy Socket Head Cap Screw; These screws are produced to meet extreme application requirements. Class 12.9 screws are perfectly suitable for all high strength applications. The black oxide finish provides minor corrosion resistance for internal use. Suitable for use on all automotive, motorcycle, snowmobile, lawnmower, tractor, and general outdoor or indoor applications where corrosion is not an issue.

Visit Store Now !!

Detail Products

Detail Reviews

E-Z LOK Threaded Inserts For Metal; Installation Kit; Carbon Steel; Includes 10-24 Thin Wall inserts, drill, tap, installtion tool

E-Z LOK Threaded Inserts For Metal; Installation Kit; Carbon Steel; Includes 10-24 Thin Wall inserts, drill, tap, installtion tool Reviews

Other Picture

E-Z LOK Threaded Inserts For Metal; Installation Kit; Carbon Steel; Includes 10-24 Thin Wall inserts, drill, tap, installtion tool Feature

• Installation Kit With Inserts, Drill, Tap & Driver
• Quickly Install With Included Tools
• Carbon Steel, UNC Threads
• Strong, Solid Construction Design
• Ideal For Soft Metals Like Aluminum, Cast Iron, or Magnesium

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours).

Visit Store Now !!

Detail Products

Detail Reviews

PFC 1/2"-13 NC x 12" Grade A Carriage Bolt Hot Dip Galvanized - (Sold Each)

PFC 1/2"-13 NC x 12" Grade A Carriage Bolt Hot Dip Galvanized - (Sold Each) Reviews

Other Picture

PFC 1/2"-13 NC x 12" Grade A Carriage Bolt Hot Dip Galvanized - (Sold Each) Feature

• 1/2" Diameter with 13 NC Thread (National Course)
• 12" Length (Length is measured from under the head)
• Grade A Low Carbon Steel Oval Head Style Carriage Bolt (Meets ASTM A307 & ASME B18.2.1)
• Hot Dip Galvanized (HDG) to meet ASTM A153
• Sold Individually (1 each)

PFC Carriage Bolts - Carriage Bolts or Carriage Screws have a square neck that keeps them from turning once tightened. Use in square holes for wood-to-wood and wood-to-metal fastening. Length is measured from under the head. Fasteners are typically made of low-carbon steel. Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Lehigh Group RH26-6 Rafter Hooks

Lehigh Group RH26-6 Rafter Hooks Reviews

Other Picture

Lehigh Group RH26-6 Rafter Hooks Feature

• Lehigh Group
• RH26-6
• Hooks & Screw Eyes

Lehigh Group RH26-6 Rafter HooksLehigh Group RH26-6 Rafter Hooks Features:; Hang fiberglass ladders, sports gear, or heavy plant holders, etc; Rust resistant, zinc-plated steel with a no mar vinyl cushion coating; 2 per card

Visit Store Now !!

Detail Products

Detail Reviews

Nylon 6/6 Spacer, 1/2" Long x 0.500" OD x 0.257" ID for 1/4" Screw Size (Pack of 100)

Nylon 6/6 Spacer, 1/2" Long x 0.500" OD x 0.257" ID for 1/4" Screw Size (Pack of 100) Reviews

Other Picture

Nylon 6/6 Spacer, 1/2" Long x 0.500" OD x 0.257" ID for 1/4" Screw Size (Pack of 100) Feature

• Good Insulation Properties
• Corrosion resistant
• Good for bushings, rollers or glides
• Color:Off White
• Nylon 6/6

Tough, resilient Nylon Spacers work well in electrical and electronic insulation applications, and are often used as bushings, bearings, rollers or glides. Drilled, non-threaded Spacers are made from corrosion resistant Nylon Type 6/6.

Visit Store Now !!

Detail Products

• RSN-14/16 Nylon 6/6 Spacer, 1" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100)
• RSN-14/04 Nylon 6/6 Spacer, 1/4" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100)
• RSN-14/12 Nylon 6/6 Spacer, 3/4" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

Detail Reviews

RSN-14/05 Nylon 6/6 Spacer, 5/16" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100)

RSN-14/05 Nylon 6/6 Spacer, 5/16" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100) Reviews

Other Picture

RSN-14/05 Nylon 6/6 Spacer, 5/16" Long x 0.500" OD x 0.257" ID for #1/4 Screw Size (Pack of 100) Feature

• Good Insulation Properties
• Corrosion resistant
• Good for bushings, rollers or glides
• Color:Off White
• Nylon 6/6

Tough, resilient Nylon Spacers work well in electrical and electronic insulation applications, and are often used as bushings, bearings, rollers or glides. Drilled, non-threaded Spacers are made from corrosion resistant Nylon Type 6/6.

Visit Store Now !!

Detail Products

Detail Reviews

Import 250175 #8-32x5/8-5/16 Coupling Nuts Gr2 Zn

Import 250175 #8-32x5/8-5/16 Coupling Nuts Gr2 Zn Reviews

Other Picture

Import 250175 #8-32x5/8-5/16 Coupling Nuts Gr2 Zn Feature

• Package Quantity: (1) Piece
• Type: Inch Standard
• Thread Size: 8-32
• Height (Inch): 5/8
• Hex Size (Inch): 5/16
• Material: Steel
• Material Grade: 2
• Finish/Coating: Zinc

Coupling Nuts Type: Inch Standard Thread Size: 8-32 Height: 5/8 Hex Size: 5/16 Material: Steel Finish/Coating: Zinc

Visit Store Now !!

Detail Products

Detail Reviews

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10)

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10) Reviews

Other Picture

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1/2" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1/2" Length (Pack of 100)

Detail Reviews

#8X3/4 Slotted Hex Head Washer Sheet Metal Screw (100 count)

#8X3/4 Slotted Hex Head Washer Sheet Metal Screw (100 count) Reviews

Other Picture

#8X3/4 Slotted Hex Head Washer Sheet Metal Screw

Visit Store Now !!

Detail Products

Detail Reviews